How can we prevent the leakage of the heating tube?
The stainless steel electric heating pipes introduced on the market now have different models and specifications. In addition, because they are made of steel, the heating pipes of this kind of products will appear more and more when the temperature is not working. The phenomenon of heat.
If you have incorrect operation or accidents when using this type of product, then such electric heating tubes may have different degrees of leakage. So how can we prevent leakage? Let's take a brief look at it together.
First, the stainless steel electric heating tube is in use, especially after it is connected to the power source. Keep the operating power supply below 10% of the rated voltage as much as possible. Because this can help the power of the electric heating tube to be relatively reduced. In turn, the internal temperature of the electric heating tube is not too high.
Secondly, the leakage phenomenon of stainless steel electric heating tube is often caused by heating liquid. So when you use it, you must pay more attention to the heating zone of the heating tube, and remember to immerse all of it in the heating liquid. If the air is dry, set the fan to circulate as much as possible, and ensure that the temperature is controlled within the normal range of 200-300°C.
Third, there are many electric heating tubes on the market now, regardless of the material of the heating tube, especially for stainless steel products. After a period of use, there will be varying degrees of grease and water scale. In this case, you should take some cleaning treatments on the surface of the stainless steel electric heating tube after using it for a period of time.
Fourth, in addition, the installation of stainless steel electric heating pipes is also very critical. In the process of installation, if the steps are not correct or the operation is not standardized, it may cause the leakage of the electric heating tube.
Fifth, for different tank sizes, there are also certain differences in how to install electric heating pipes. If the volume of the water tank used by you is large, and the heating time is required to be faster at this time, it is recommended that you can consider choosing the flanged heating tube currently on the market.