24V DC Immersion Heater Element Electric Pipe Heater Industrial Electric Ceramic Cartridge Heater 40W
24V DC Immersion Heater Element Electric Pipe Heater Industrial Electric Ceramic Cartridge Heater 40W
General Information
A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application. Highly compacted they reach a surface watt density of up to 30 w/cm².
It may be used to heat any kind of substance or material, such as oil, air, or sugar. However, a common application is plastic pellets, which are melted in order to form molded plastic parts. An example of such a process is the "hot runner" process. Cartridge heaters resemble tubular heaters structurally but tend to have higher watt densities.
Characteristics & Properties
Tube diameter: Φ4mm-Φ30mm
Tube Material: SS304, SS316, SS321 and NICOLOY800 etc
Insulation Material: High-purity MgO
Conductor Material: Ni-Cr or Fe-Cr-Al Resistance Heating Wire
Wattage density: high/middle/low (5-25w/cm2)
Lead Connection Option: Crimped or Swaged leads
Lead wire type: 10" Standard (Teflon/silicone high temperature fiberglass)
Heat intensity | Not exceeding 30w/cm2 (advisable) |
Power | Depends on the dimension |
Exhaust extreme (when cold) | <=0.1mA to 242 v. |
Insulation (when cold) | 5 Min Ohms 500 Watts minimum |
Dielectric strength | 1500v. 1/sec |
Working temperature | 750 Deg C max. |
Length tolerance | +/-1.5% |
Diameter tolerance | -0.02 to -0.06 mm |
Cut off connection tolerance | +/-15 mm |
Power tolerance (w) | +5 % - 10 % |
Cold areas | Depends on length and diameter 5-25mm |
Suggested Applications
Liquid Immersion
Plastic Molds
Dies
Labeling
Medical Equipment
Platens
Packaging Equipment
Hot Stamping
Sealing
Injection Molding
